PC Oscilloscopes

Port Forwarding???

I am trying to get a port opened up for TCP and UDP on a Siemens Speedstream 4200 DSL modem. I got it set to forward the ports to my PCs IP, but there is a router between the modem and my PC.The router is a D-Link DIR 625. I tried to set the router to forward the ports to my PC, but it don't seem to be working. (port forwarding test fails), so I tried it on the modem with the same failed results. What do I need to do to get this setup working correctly?

With the 4200 you actually have a ROUTER! It needs to be put into BRIDGE MODE first! Then you can configure the Dlink and all should work as advertised.

Here are the directions for setting the 4200

http://www.dslreports.com/faq/13201

You may also want to read this one

http://www.dslreports.com/forum/r18816704-Using-a-router-with-speedstream-4200

Once you have that done, connect the dlink and use the information on http://portforward.com to configure the router.

That should get it.

Good Luck and God Bless

A look at what is currently available on eBay

HP 8711A-K12 Switching 12 Port Test Set US $99.00

Agilent 8753ES Option H39 Three-Port Test Set Manual[15 US $19.99

Agilent 85132F Flex Test Port Cable Set US $2,778.00

Agilent 85130A Adapter Set Test Port APC-7 to APC3.5mm Female US $499.00

HP 4380A 8-Port S-Parameter Test Set 1 kHz to 500 MHz US $2,300.00

Agilent / HP 85133F Flexible Test Port Cable Set, 2.4mm, DC to 50 GHz US $3,499.00

Advantest R3965A 40MHz to 8GHz 3 Port Test Set US $2,600.00

Anritsu/Wiltron 3671K50-1 Flexible Cable Set, 2.92 mm (Test Port) to 2.92 mm US $1,699.00

Advantest R3965A Vector Network Analyzer Test Set 40 MHZ-8 GHZ, 3 Ports US $2,300.00

HP FDDI PORT J2215A MULTIMOD FDDI TEST SET WORKING GOOD CONDITION US $699.99

Items recently purchased from this site